10mm – Sealed Bearing Extractor
$16.00
Individual 10mm extractor for removing 6000, 6200, 6800 & 6900 sealed bearings.
In stock
Description
Individual 10mm extractor for removing 6000, 6200, 6800 & 6900 sealed bearings.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
- 6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
- 6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
- 6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
- 6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Instructions
See our step-by-step instructions guide here.
Additional information
| Weight | 1.53 oz |
|---|---|
| Tool Type | Hub / Suspension Tools |
| Drifts | 8mm to 10mm |
Bearing extractor requires the following tools:
- (1) 8mm open or box-end wrench
- (1) 10mm open end wrench
- (1) Punch (diameter should be smaller than 10mm.)
- (1) Hammer
